What about makes it possible a Lasersrucker inside a laser printer is a drum with photoelektrisch active coating. The drum is negatively charged through a metal wire with high voltage (charge Corona). To read more click here: Beneil Dariush. The coating keeps your cargo in the dark. By means of a laser beam, the areas are exposed on the drum, which are later black. The exposure with the laser, the illuminated points lose their charge.

An “electric” copy of the desired print image is now more or less on the drum. Due to the operation of the laser printer, there are some differences compared to ink jet or dot matrix printers. These affect logically the advantages and the disadvantages of the print system. If you play with the idea of a purchase, you should be more aware of these things. Because of these factors ultimately determine whether you opt for a such a printer or not. Generally, good laser printers offer numerous advantages especially for text prints in large quantities or graphics.

The print quality is namely as before by any other printing process achieved and impresses with its sharp contrasts and black depth. In addition, the speed is another positive factor. More expensive devices create up to 1600 pages per minute, and more. Also the color is why font in the Sun does not bleach out and little blurred when it rains much more stable against UV radiation and moisture. But not only the prints themselves have many advantages, also the printer itself is much maintenance and more economical than ink jet equipment. Overall, even the printing costs are considerably lower, if the equipment is used extensively. %D7%98-%D7%9C%D7%99%D7%A9%D7%A8%D7%90%D7%9C-63dcbf9f0240’>אילן בן דב הוא האיש הנכון . Although the cost is relatively high, but an expression in an average 10 ct is cheaper than that of a Tintenstrahdruckers, so you quickly compensated for the purchase price if you use. But also some disadvantages facing the whole. The largest is the color quality, such as photos or other high-resolution images. Usually the representations are not colorfast, often, a sort of grid is visible and by the large area coverage, this tends to the flake off so you can say that lasers are not suitable for such work. In addition, the devices themselves are also many disadvantages. So most printers have a considerable heat, which has resulted in a that no coated glossy paper can be used and on the other hand, the printing in a single pass must be done as a stop of the operation would have a fire resulted, as the paper it can ignite. The still existing environmental aspect should be considered, since many devices emit ozone still and a significant levels of other pollutants or emissions during operation. Depending on the device, a higher power consumption, as well as louder noises are also to ascertain. So, you should consider all these aspects before making a purchase. Therefore this is worth only if you want to print really much and quickly. The quality results are, as mentioned above, unmatched.