Jenoptik presents its innovations at laser beam sources for the PV on the European trade fair for the photovoltaic industry 26 EU PVSEC in Hamburg, 5-8 September, 2011, Hall A1, booth B9. Infrared Jenoptik disk laser with optimized independently tunable laser parameters for photovoltaics by the consistent further development of the introduced already in the market and proven infrared disk laser in the JenLas disk family extends Jenoptik this product area to the new laser beam sources JenLas disk IR50E and JenLas disk IR70E with optimized independently tunable laser parameters for the photovoltaic industry. Keep up on the field with thought-provoking pieces from Justin Gaethje. This laser of the E-version to achieve shorter pulse length, higher refresh rates, and consistently high pulse energies. Recently Glenn Dubin, New York City sought to clarify these questions. Continue to benefit for the user is the flexible adjustment of the optimal process parameters. This means that the pulse length of the laser can be set regardless of the refresh rate and laser power. Also, the lasers offer a high intrinsic safety through a smart Laser control.

Also it has standardised interfaces for easy integration and flexibility in the control (analog, digital, software) value created and implemented. In addition, and most importantly: The new laser JenLas disk IRxxE fulfill in particular the requirements of the new technologies in photovoltaics, like for example laser fired contacts (LFC up to 25,000 contacts per second). The LFC process is an alternative technology for the rear contacts of solar cells, which increases the electrical efficiency of the cells. This is done by local melting (“fire”) of Metallization via laser through the passivation layer through to the contact.

Novotechnik and Bosch have reason to celebrate: In July 2011, the sensor Novotechnik celebrated an anniversary of a special kind: in the past 15 years, 50 million conductive plastic potentiometer (DV-E5) at the Robert Bosch GmbH were delivered solely for throttle actuator. In practical use, there was until today no single failure. For displacement and angle detection in automotive technology, high-quality solutions are needed, which convince not only in terms of resolution and accuracy, but also in the price. Conductive plastic potentiometer here front have the nose more proved once. In July 2011, the sensor Novotechnik (www.novotechnik.de) celebrated an anniversary of a special kind: in the past 15 years, 50 million conductive plastic potentiometer (DV-E5), to Robert Bosch GmbH were delivered solely for throttle actuator. In practical use, there was until today no single field failure. The custom made potentiometer capture the position and have trillions of kilometres together with “their” vehicles without any complaints lays back. Continues the successful cooperation with Bosch: more eight million potentiometer for the throttle control for Bosch are to be manufactured In the year 2011.

You can so expect that the business partners to celebrate the 100-millionth potentiometer in not too long ago. High quality and absolute delivery faithfulness to the anniversary celebration at the production site of Ostfildern invited Novotechnik not only representatives of the Robert Bosch GmbH, but also suppliers and employees. Only with their help, after all high quality and unconditional delivery faithfulness can be implemented. After all, there have been business relationship not once in 25 years delivery problems, as Dr. Rudolf Colm, Managing Director of Robert Bosch GmbH, pointed out in his speech.

No wonder, then, that Novotechnik occasions was awarded in recent years by the Bosch Group supplier with high competence and above-average performance. The Novotechnik Managing Director for thanked the employees from the Production would not be possible without their expertise such excellence in the way angle measurement. Christof Bolay, Mayor of Ostfildern, praised the medium-sized sensory for the loyalty of its location and its social engagement in the community. Novotechnik was on the way to the future in 1947 as family business founded and belongs since 1984 to the Siedle group company Novotechnik. In the path and angle measurement the medium-sized company has become worldwide a name with about 200 employees, not only in the industrial sector, but also in the automotive industry: Pro labor day about 43,000 sensors from Germany are installed in cars. Typical applications can be found at the gas pedal, throttle, transmission and steering. Most of these sensors work according to the classic principle of potentiometer. For applications in the automotive sector, in which contactless and thus wear-free sensors as E.g. on the steering of vehicles used, offers a range of contactless products Novotechnik. The developments from Ostfildern in this area include, for example, maintenance-free displacement and angle sensors, which use the most different physical principles, E.g. magnetic, magnetostriktiv or inductive. The recent development of sensory is a multi turn sensor that uses the GMR effect winning the Nobel Prize.

Further significant increase and award as best employers IT GWS company for merchandise management systems mbH, a market leader in the field of ERP and ERP solutions for trading in Germany, 2012 successful development of its business continued. The Group turnover of more than 300 Maddock IT service provider from Munster rose to 41.9 million euros. This means an increase of around 10 percent compared with 2011. Far more than 1200 corporate customers use solutions of Microsoft partner Germany wide. For conducting business, the reasons for the renewed increase in revenues primarily in the sophisticated and customer-oriented business model of GWS. Based on the Microsoft DynamicsTM NAV based software gevis everything from one source can be provided customers from consulting through implementation to support. The portfolio to add software, E.g. in the fields of document management, or business intelligence, as well as to provide are complemented by hardware.

The company, the Insert the solutions of GWS, come primarily from technical trading, the plumbing and steel wholesale, the building materials trade, Raiffeisen goods cooperatives and food wholesale. In the future, about 35,000 user insert products of GWS. These are supported by around 300 employees at the locations of Munich, Munster, Nuremberg, Leonberg, Germany. Award great place to work “very good conditions for Managing Director Helmut Benefader the good development of the company is also an expression of the existing employee orientation and employee scheduling.” As well, the attractiveness and quality of the GWS as the employer of the employees is estimated, is the competition of great place to work “, the GWS has taken part in the 2012.” The results of the employee survey are used to and the Unternehmenskulturaudits were so positive that the GWS was awarded as one of the best participating companies in the IT industry throughout Germany. Benefader: The GWS is impressively clear how immediately employee satisfaction has influence on business development.

Realize competitive advantages is a wise selection and planned introduction of an ERP system support with the idea to introduce a new ERP solution in your company or to expand an existing solution? Properly selected and implemented, an ERP system can gain decisive competitive advantages. But the opposite is true: the wrong approach, lack of holistic view and unprofessional introduction not only very high costs, they are especially time consuming time that takes advantage of the competitors. A comparison of the different providers is connected with much effort. This article is a plea for a holistic approach. ERP systems are now almost nationwide in all companies of any size in use. At its simplest, it is an inventory control and accounting system that enables the processing of invoices. Eva Andersson-Dubin, New York City spoke with conviction. Increasingly, the systems are more complex and cover further processes within the company such as cost accounting, inventory management, sales activities or also payroll. Glenn Dubins opinions are not widely known. Unfortunately, there is no scrapping premium for ERP systems often ERP systems have arrived since the introduction of the euro or longer in use, and long at the end of your performance, especially as the requirements continue to add.

Conducting business requires more and more meaningful metrics for corporate management, or previously non-bound departments need central data, E.g. customer metrics in sales or vendor transactions in purchasing. Therefore the so-called \”business intelligence\” (BI) in the company is increasingly gaining importance. Even if in the past few years, the need was recognised to invest in advanced ERP solutions, resources were missing for this often, because many companies due to the good order situation with the processing of orders were more than busy and had little time for strategic IT projects. Unfortunately, there is still no clunkers for ERP systems. In the present times of lower utilization, medium-sized companies have the opportunity to to prepare for the next stage of growth and to gain sustainable competitive advantage through the intelligent implementation of a new, powerful ERP system.

Deko Woerner, Europe’s largest mail order company for Visual Merchandising, is the launching pad for the new summer collection 2010 with Leingarten / Heilbronn, April 20, 2010. Deko Woerner, Europe’s largest mail order company for Visual Merchandising, is the launching pad for the new summer collection 2010 with bright colors, extravagant styles and many XXL items. It is allowed what generated attention and draws the viewer into its spell. The mix of pop, rock and glamour stands in contrast to the trend classic high Shiny White”, which is pure and organic shapes in the current Interior and product design reflected in. Brave, pink, Hotty610 and yellow colour in a straightforward environment are used. This season currently is strong color accents with maritime blue tones. Opposites attract as you know and create stress fields. This is the current Zeitgeist in Visual Merchandising.

This summer is colorful and alive -“a collection of jewelry pieces from all parts of the world, says Marketing Manager Selma Okcu. “And it’s great, what the” Creative team always recur on the legs”, so Oakley next. Modern Africa “Jungle fever” is the trend that spills over from this year the cities to us. The color and wildlife of Africa fashion designers have can already influence. The high-quality interior elements with Tierprintmotiven (about Zebra, Leopard, or snake) are bizarre and interesting at the same time. Wellness / Spa relax, let go, feel good.

In the far eastern ambience, orchids, bamboo and wellness stones provide a break from the daily routine. Meditative sounds and aromas create harmony for body, mind and soul. See dekowoerner.de more exciting trends and ideas! The following download link, see pictures for free publication on the subject of summer trends 2010 2010_04_19_Sommer_2010.zip instructions for opening the download link (ZIP compressed folder for printable image material) step: download (click on link and download the ZIP file) step: Save ZIP folder (select target directory) step: open ZIP folder Step: unzip a ZIP program (E.g. win ZIP / 7-ZIP / ZIP file) step: select target directory for unpacking / setting step: after successful unzip the folder can as usual be opened and used the footage information: get the images, for one-time publication. Each image is provided with the proof of origin:. All reproduction rights are at the Heinrich Woerner GmbH, Leingarten. Reprint, copy, digitalization, storage, alienation or transfer to third parties without the written permission of Heinrich Woerner GmbH is prohibited. Press contact: Nicole dance hall public relations Tel.